1. Clone Mac Hard Drive Disk Utility Mojave Ca
2. Clone A Drive Mac
3. Clone Mac Hard Drive Bootable
4. Clone Mac Hard Drive Disk Utility Mojave Az

Note: the link’s convert (to APFS) instructions are a bit dated, as they’re for macOS 10.13 High Sierra; I’m using 10.14.x Mojave and my notes below reflect Disk Utility in Mojave. When the SanDisk SSD is first mounted (drive viewed in the side pane of Disk Utility), Step 4 requires selection of top most (called “main” in the. Easy guide to copy hard drive on macOS Mojave. The first thing we have to do is downloading and installing DoYourClone program on the Mac computer. Step 1: Select the hard drive we need to copy. Here, we have to choose source drive and destination drive. The files stored on the source drive will be cloned to the other hard drive. In the sidebar, select the volume to which you want to copy/clone data. The volume you select will be the destination drive for the Restore operation. Select Restore from Disk Utility’s Edit menu. A sheet will drop down, asking you to select from a drop-down menu the source device to use for the Restore process. Note: Before fixing the Macintosh HD not showing up in Disk Utility issue, please stop using the Mac computer and make sure you have a backup copy of the Mac hard drive. That's because, your any further operation on the Mac computer, including troubleshooting the hard drive not mounting errors, may write new data to the unmounted Mac hard drive.

Article ID = 232
Article Title = Virtualising a physical Mac/hard disk/clone/disk image file
Article Author(s) = Graham Needham (BH)
Article Created On = 27th March 2019
Article Last Updated = 27th March 2019
Article URL = https://www.macstrategy.com/article.php?232
Article Brief Description:
Instructions for installing, setting up and virtualising a physical Mac/hard disk/disk image file

Virtualising a physical Mac/hard disk/clone/disk image file

The ability to virtualise an existing Mac/macOS installation is important and very useful as it is an easy way to continue running your old Mac and also a possible way to run 32-bit applications that do not run on macOS 10.15 or later. MacStrategy presents this special guide to virtualising a physical Mac/hard disk/clone/disk image file.
This article deals with transferring an existing Mac running Mac OS X / OS X / macOS to a virtual machine, or take a bootable storage device/clone/disk image and convert it into a virtual machine. If you would prefer to set up/install a virtual machine with a clean Mac OS X/OS X/macOS from scratch please see one of the following articles instead:

• Mac OS X 10.6 Snow Leopard (Server) - costs money but you may already be running/want to run this to be able to use PowerPC/Rosetta based applications
• OS X 10.7 - OS X 10.8 is better
• OS X 10.8 - costs money but if you already own it/want to pay for it, it runs very efficiently in a virtual machine and there are few internet/iCloud based services clogging it up
• OS X 10.9 - was very kludgy and slow when installed on a hard disk
• OS X 10.10 - was slow when installed on a hard disk, does not support latest Apple internet/iCloud based services
• OS X 10.11 - free, supports most internet/iCloud based services
• macOS 10.12 - free, supports most internet/iCloud based services
• macOS 10.13 - buggy, slow, new Apple File System
• macOS 10.14 - still being revised, new Apple File System

Virtualisation Software

• Parallels Desktop [£79.99 inc VAT - 14 day free trial available]
  
• VMWare Fusion [£70.00 inc VAT - 30 day free trial available]
• Oracle VirtualBox [FREE - Open source under GNU General Public License (GPL) version 2]

Instructions

Clone Mac Hard Drive Disk Utility Mojave Ca

NOTE: This document was written using a Mac mini (2014 model) with macOS 10.14 Mojave running in 64-bit only test mode and using Parallels Desktop 14.1.2, VMWare Fusion 11.0.2 and VirtualBox 6.0.4.

Preparation

NOTE: You will need the following:

1. Mac computer for hosting your preferred guest OS preferably with a working Recovery Partition
2. Make sure your actual, physical Mac has a working internet connection e.g. use a web browser to go to https://www.apple.com and see if you can view a web page
3. Purchase/install/update your preferred virtualisation software (see list above)
4. On later versions of macOS your preferred virtualisation software will require specifically allowing their System Extension(s) to run via System Preferences > Security & Privacy, plus they may require to be granted access to Accessibility
5. Purchase/download/obtain your preferred cloning software (we list some in our How To Clone Your Primary/Boot Drive article - we highly recommend Carbon Copy Cloner)
6. If you going to clone from a physical Mac or a clone on a bootable storage device, if possible, boot that system first to make sure it works/is bootable, and also de-activate any software e.g. Adobe Creative Suite (applications)
7. Bootable physical Mac/hard disk/clone/disk image file of your old system
NOTE: If you have the original Mac you will need to clone its startup disk either to an external storage device (preferably USB) or to a disk image first using, for example, Carbon Copy Cloner.
8. Make sure you have plenty of free space on your physical Mac's hosting drive - you will need to create a basic Mac OS X / OS X / macOS virtual machine where you may need to copy the disk image file of your old system to + an additional virtual machine drive that has enough space to host your old system
9. If you are using an external storage device for your bootable clone or to hold the disk image file it's best to rename it to something that is easy to recognise e.g. 'VM Transfer'
10. Create a basic/clean Mac OS X / OS X / macOS virtual machine - if your Mac host computer has a working Recovery Partition, in VMWare Fusion you can easily do this by going to File menu > New… > select 'Install macOS from the recovery partition' > click 'Continue' and follow the on-screen instructions. Alternatively, use our step-by-step guides:

Instructions for virtualising a physical Mac/hard disk/clone/disk image file with:

Parallels Desktop Instructions

We have not tested this in Parallels Desktop but you should be able to do something similar to what we did in VMWare Fusion - we will update this article when we have more time to test this. Don't forget to donate to us (use the button in the bottom left corner of this web page).

VMWare Fusion

1. Make sure the basic/clean Mac virtual machine you created in the preparation section above is shutdown
2. Go to Virtual Machine menu > Settings > Hard Disk (SATA) > click 'Add Device…' > select 'New Hard Disk' > click 'Add…' > choose size > Apply
NOTE: This additional virtual machine drive must be larger than the space used by the physical Mac/hard disk/clone/disk image file of your old system.
3. Start up/boot the virtual machine
4. At the Desktop Mac OS X / OS X / macOS will recognise the additional virtual machine drive and ask you to initalize it > click 'Initialize' (which will open Disk Utility)
5. Select the unformatted additional virtual machine drive on the left (VMware Virtual SATA) - this is the one without 'Macintosh HD' underneath it
6. Set 'Name:' to 'Second HD', 'Format:' to 'OS X Extended (Journaled)', and 'Scheme:' to 'GUID Partition Map' > click 'Erase' to initalize/format the additional virtual machine drive (it should now mount/appear on your Desktop if you have the virtual machine's Finder 'Preferences' set to show 'Hard Disks')
7. Click 'Erase'
8. If OS X / macOS asks you whether you want to use the additional virtual machine drive for Time Machine Backups click 'Don't Use'
9. Quit Disk Utility
10. Connect your physical Mac/clone or hard disk with the disk image file of your old system to your virtual machine OR, if you have enough space, copy the disk image file of your old system on to the virtual machine's Desktop
11. The physical Mac/clone or hard disk with the disk image file of your old system on it should now mount/appear on your Desktop (if you have the virtual machine's Finder 'Preferences' set to show 'Hard Disks') OR double click to open the disk image file of your old system that is now on your virtual machine's Desktop
12. Using your cloning software of choice, clone your physical Mac/hard disk/clone/disk image file of your old system to the additional virtual machine drive e.g. with Carbon Copy Cloner:
13. In the virtual machine go to Apple menu > System Preferences > Startup Disk > set it to 'Second HD'
14. Quit System Preferences
15. Shutdown the virtual machine (Apple menu > Shut Down) - not Restart
16. Go to Virtual Machine menu > Settings > Hard Disk (SATA) > make sure 'File name:' is 'Virtual Disk.vmdk' > click 'Advanced options' at the bottom > click 'Remove Hard Disk'
17. You will be given the choice to keep or Trash the virtual disk file which is your choice (it might be worth keeping the original virtual disk if you have plenty of space as it is a clean Mac OS X / OS X / macOS virtual machine)
18. Go to Virtual Machine menu > Settings > General
19. Change the virtual machine's 'Name' to something that is relevant to your original Mac system e.g. 'Old OS X 10.8 Mac Pro'
20. Change the virtual machine's 'OS' to match that was on your physical Mac/hard disk/clone/disk image file
21. Go through and configure your required virtual machine custom settings:
22. Start up/boot the virtual machine
23. To avoid confusion with your host Mac, rename the virtual machine's hard disk from 'Second HD' to something that is different to your current hard disk e.g. 'Virtual OS X 10.8 HD'
24. Go to Virtual Machine menu > Install VMWare Tools
25. Install VMWare Tools, following the on screen instructions and restart the virtual machine when complete (you may get a message about the installer certificate being out of date and this appears to stop the Tools installing so things like drag and drop are not supported [with this guest OS])
26. If you are running an unsupported version of Mac OS X / OS X / macOS make sure you check out our Securing Older Operating Systems article

Q. What are the current, supported versions of macOS?

A. macOS 11 (Big Sur), macOS 10.15 (Catalina) and macOS 10.14 (Mojave) are supported by Apple. The latest security updates are:
• macOS 11 - included in the macOS 11 Installer (v11.0.1)
• macOS 10.15 - included in the macOS 10.15.7 Combo Update + Supplemental Update 2 (5th November 2020)
• macOS 10.14 - included in the macOS 10.14.6 Combo Update + Supplemental Update 2 (1st October 2020)
• SECURITY WARNING: macOS 10.13 and earlier are no longer supported with security updates - see our securing older operating systems article.

Clone A Drive Mac

VirtualBox

We have not tested this in VirtualBox but you should be able to do something similar to what we did in VMWare Fusion - we will update this article when we have more time to test this. Don't forget to donate to us (use the button in the bottom left corner of this web page).

Clone Mac Hard Drive Bootable

Article Keywords: OS X OSX 107 108 109 1010 1011 macOS 1012 1013 1014 1015 Snow Leopard Lion Mountain Lion Mavericks Yosemite El Capitan Sierra High Sierra Mojave Catalina VM virtual machine virtualisation virtualising virtualization virtualizing physical hardware Mac hard disk drive clone disk image file .dmg bootable clone

Clone Mac Hard Drive Disk Utility Mojave Az

This article is © MacStrategy » a trading name of Burning Helix. As an Amazon Associate, employee's of MacStrategy's holding company (Burning Helix sro) may earn from qualifying purchases. Apple, the Apple logo, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.